OVERDRAW WARNING: THE USE OF AN OVERDRAW THAT ALLOWS A SHOOTER TO DRAW THE POINT OF THE ARROW PAST THE SHELF OF THE BOW SIGNIFICANTLY INCREASES THE RISK OF INJURY TO THE SHOOTER. When using a bow equipped with an overdraw the arrow should always be cut to a minimum of one inch in front of the arrow rest at full draw. Selecting the correct arrow length is the responsibility of the shooter and failure to do so could result in severe injury, and/or damage to shooting equipment.
ARROW REST WARNING: Before shooting any Gold Tip arrows it is extremely important to inspect the arrow rest to ensure that it is properly adjusted to fit the diameter of the arrow shaft being used. FAILURE TO PROPERLY ADJUST THE ARROW REST SIGNIFICANTLY INCREASES THE RISK OF INJURY TO THE SHOOTER AND DAMAGE TO SHOOTING EQUIPMENT. Incorrect adjustment of the arrow rest may cause the arrow to fall from the arrow rest and/or get jammed in the bow which could result in injury to the shooter or bystanders, and damage to shooting equipment. ALWAYS MAKE CERTAIN THAT THE ARROW REST IS PROPERLY ADJUSTED BY A QUALIFIED INDIVIDUAL BEFORE SHOOTING.
ARROW INSPECTION WARNING: INSPECT EACH ARROW FOR DAMAGE PRIOR TO EVERY SHOT. Proper care of carbon arrows can ensure years of quality performance. However, shafts can be damaged. To inspect an arrow, grasp it on both ends and flex it away from yourself and others while visibly and audibly checking for splinters, cracks, or nicks. Rotate and repeat this inspection process four to five times around the entire circumference of the shaft. If you find an arrow to be damaged in any way discard it immediately. SHOOTING DAMAGED CARBON ARROWS CAN RESULT IN ARROW FAILURE AND POSSIBLE INJURY.
CUTTING CARBON ARROWS: Cut carbon arrows using a high-speed arrow cut-off saw only. Use of any other type of saw may cause damage to the arrow.
SAFETY RECALLS: There are no safety recalls at this time.